How to install the second W3A hard drive enclosure on ASUS S200E series

How to install the second W3A hard drive enclosure in the ASUS S200E series:

ASUS S200L3217E (Jazz Black)< /p>

 1. Insert the hard disk into the HDD connector board IDE port.

2. Install the assembled hard drive into the 2nd HDD Cass.

3. Install two black screws on both sides of the IDE interface.

4. Install four white hard drive screws on the bottom of the bottom case and tighten them.

5. Assembly is completed.

6. Push the optical drive lock to the unlocking position and push the optical drive out at the same time. Remove the optical drive.

7. Push the second hard drive box that has been assembled previously into the host.

8. After entering the BIOS, you can see the second hard disk box.